|
|
Build Your Online Product Catalogs?
Theory
In electrical and electronic engineering, a current probe is an electrical device with jaws which open to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with it, or to disconnect it for insertion through the probe. Current probes are typically used to read the magnitude of alternating current (AC) and, with additional instrumentation, the phase and waveform can also be measured. Some clamps meters can measure currents of 3000 A and more.
Applications
The Q125B is a high performance clamp on AC Current Probe with excellent transformation and low phase shift. The high quality magnetic core and uniform windings provide for accurate measurements up to 1000A AC/2000A AC/3000A AC. The Round jaw permits 125mm cable positionings. Provide excellent TRMS capabilities and reliable signal reproduction.
&©|8226; Large industrial loads
&©|8226; Measuring around cable bundles
&©|8226; Power load monitoring
&©|8226; Electrical utility
&©|8226; HVAC
&©|8226; Industrial maintenance
&©|8226; Laboratory
&©|8226; Plant maintenance
Cable fault tester
Features
&©|8226; Measurement range of 1A to 3600A AC
&©|8226; Large jaw opening designed
&©|8226; Improved ergonomic design and easy operation
&©|8226; Conforms to EN 61010, 600V CAT III
&©|8226; Low phase shift for power measurement
Nominal range: 1 to 1000AAC, 1 to 2000AAC, 1 to 3000AAC
&©|8226; Transformation ratio: 1000:5, 2000:5, 3000:5
&©|8226; Output:5mA AC/A AC, 2.5mA AC/A AC, 1.666mA AC/A AC
&©|8226; Designed for use on DMMs, power and harmonic meters, recorders or instruments with AC current ranges
UL, CE mark
|
| Company: |
Beijing GFUVE Electronics Co.,Ltd
|
| Contact: |
Ms. ivy zhang |
| Address: |
01117-8 FortuneĀ Street No.67 Chaoyang Road, Chaoyang District, Beijing, China |
| Postcode: |
100025 |
| Tel: |
86 10-85583577 |
| Fax: |
86 10-85781298 |
| E-mail: |
|
|
|
|
Home
