|
|
Build Your Online Product Catalogs?
The round jaw design on the P50 Series AC current probes along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with
wide frequency are important. Measurement range is 1mA to 1200A.
The P50 is a general purpose 1000A AC current probe designed for use with DMMs, loggers and other
instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp
measured in the jaw. The P50 has an integral 2.5m lead terminated. The rounded jaw design on this probe
makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide
frequency response are important.
Applications
1. Power quality measuring
2. Large industrial loads
3. Measuring around cable bundles
4. Power load monitoring
5. Waveform analysis
6. Energy meter calibrator
Features
1. Measurement range of 1mA to 1200A AC
2. Large jaw opening accommodates conductors up to
two 500kcmil
3. Improved ergonomic design and easy operation
4. High content nickel metal core
5. Conforms to EN 61010, 600V CAT III
6. Low phase shiFT for power measurement
7. Designed for DMMs, recorders, loggers, oscilloscopes, power
and harmonic meters
8. UL, CE mark
Parameters
Electrical parameters:
Ratio ;1000: 1 or 2000:1 (customized)
Accuracy class :0.1%, 0.2%, 0.5%
Primary current :0 - 1000A AC
Secondary output: 1mV/A AC, 5mV/A or (customized)
Max. Cont. Input current :1200A
Over voltage category :CAT III 600V
Output signal: 333mV, 500mV,1V,2V,5V AC at nominal input current
Accuracy (1000A Range)
0-10A ;¡Ü0.5%
10-100 :¡Ü0.2%
10-1200A :¡Ü0.1%
Phase Shift(1000A Range)
0-10A ¡Ü0.5¡ã
10-100 ¡Ü0.2¡ã
100-1200A ¡Ü0.1¡ã
Frequency range 40Hz-2000Hz
Dielectric strength :3KV 50Hz/60Hz at 1 minute
Temperature range: -20℃ to +55℃
Output :2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard :EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode: Le |
| Company: |
Beijing GFUVE Electronics Co.,Ltd
|
| Contact: |
Ms. ivy zhang |
| Address: |
01117-8 Fortune Street No.67 Chaoyang Road, Chaoyang District, Beijing, China |
| Postcode: |
100025 |
| Tel: |
86 10-85583577 |
| Fax: |
86 10-85781298 |
| E-mail: |
|
|
|
|
Home
